PP Pipe Fittings

Polypropylene is a thermoplastic from the polyolefin group. PP is a translucent , semi-rigid polymer with good weather resistance properties. It is tough and has low water absorption. It can be easily moulded at low cost. Polypropylene is a largely non-polar, partially crystalline thermoplastic with a crystalline of 60 to 70%. PP has a density of 0.90 to 0.91 g/cm3 which is amongst the lowest densities for all plastics. PP has a non-swelling and insoluble surface; and is characterized by its outstanding chemical resistance, high thermal resistance and good fatigue strength.

Characteristic

• Operating temperature range -10 to 95°C
• But Joint / Socket Joint Welding
• Environmental resistance to most organic and inorganic chemicals.
• Good material strength and fatigue resistance

Application

• Paper & Pulp Mills
• Construction (Plumbing)
• Pharmaceutical Industry
• Desalination Plants
• Chemical Process Plants
• Laboratories
• Automotive Industry
• Fumes Ducts
• Gas Supply
• Nuclear Research Centres
• Electroplating Plants
• Textile Mills
• Food & Beverage
• Suction and exhaust pipelines
• Chemical Industry
• Pickling Lines
• Effluent Treatment/Disposal Plants
• Refineries

Range Of PP Fittings
Flange (Slip-on , Threaded , Pipe Bore , Blind , Puddle Flange , Sandwich Flange) , Pipe End ( Short Neck , Long Neck , Extra Long Neck Pipe End ), Bend ( Plain , Threaded ) , Tee ( Plain , Threaded ) , Reducer , End Cap , Hose Nipple ( Flanged , Threaded ) , Threaded Nipple , Hex Nipple , Threaded Coupling , Tank Adaptors etc.