C-PVC Hot & Cold Water Plumbing System

Best material and technology goes into manufacturing this product which makes it safe and long lasting. Our C-PVC Hot and Cold water plumbing system is very cost effective. This system is versatile as it is suitable for all plumbing and potable water applications. All the pipes and fittings are made of chlorinated polyvinyl chloride. It is available in a complete range from 15mm to 50mm (i.e. ½” to 2″) sizes as per copper tube sizes (CTS). The pipes are available in SDR 11 and SDR 13.5 pressure class and fittings are available in SDR 11 pressure class. Threaded inserts in the transition fittings are made from brass withstand chemical corrosion at the elevated temperatures. C-PVC CTS pipes and fittings are available according to IS15778 and ASTM D-2846 respectively. Pipes and fittings in 2-½”, 3″ and 4″

Features & Benefits

• C-PVC has a much higher strength/modulus than other thermoplastics used in plumbing applications. Due to its tough and rigid material property, it requires less supports with minimum offsets/looping. This material can withstand high pressure.
• Free from corrosion and offers excellent resistance to great number of chemicals like strong mineral acids and bases.
• Free from negative biological effects. It does not break down under the harshest water condition hence the quality of water is maintained.
• Saving on time and labour as jointing can be done speedily with special solvent cement supplied by the company. This makes the system 100% leak proof.
• C-PVC having a lower co-efficient of thermal expansion, it reduces expansion due to temperature variations and thereby reducing unsightly looping of the pipe.
• C-PVC has better insulation properties than metal pipes reducing heat loss and insulation requirement.
• C-PVC does not support combustion.
• Minimum maintenance.
• Long life of more than 50 years.

Fields of Application

• Corporate houses
• Academic institutes
• Solar heater application
• Hot and Cold water distribution in residential
• Commercial and public projects
• High and low rise buildings

Pipe Size

• ½” (15 mm) to 4 “(200 mm)
• Pressure Ratings : SDR 13.5, SDR 11, SCH – 40, SCH – 80
• Imported Notes :
• The SDR 11 and SDR 13.5 pipes are available from 15mm to 50mm i.e. ½" to 2" in CTS series as per IS15778
• Pipes in 2½", 3"and 4" (73.02, 88.9 and 114.30mm) are available in SCH40 and SCH 80 as per ASTM F 441.

Pipe Fittings Sizes

• ½” (15 mm) to 4 “(100 mm)
• Design : Socket Easy To Solvent Cement Joint.

Range of C-PVC Hot & Cold Water Plumbing Pipe Fittings
Coupler , Elbow 90 ⁰ , Reducing Elbow 90 ⁰ , Elbow 45⁰ , Equal Tee , Cross Tee , Reducing Tee , Reducing Bush , Reducer , End cap , Union , Female Threaded Elbow (Brass Insert ) , Female Threaded Tee ( Brass Insert ) , M.T.A. ( Male Threaded Adaptor ) Plastic , F.T.A. ( Female Threaded Adaptor ) Plastic , M.T.A. ( Male Threaded Adaptor ) Brass Insert , F.T.A. ( Female Threaded Adaptor ) Brass Insert , Ball Valve , Pipe Clip , Tank Connector , Threaded End Plug , By pass Bend .